Luvocom 3F PAHT CF 9891 BK is a 15% carbon fiber reinforced PA6 (polyamide) filament. It is extremely stiff and engineered for industrial applications. This 3D printer filament features excellent printability and processing properties.
This allows you to 3D print parts with mechanical strength, dimensional accuracy and precision comparable to injection molded parts.
It makes this filament a perfect 3D printing material for serial production of strong and stiff end-use parts.It exhibits a 50% lower water uptake at a four times slower rate compared to standard PA6 nylon filaments.
Parts printed with Luvocom 3F PAHT CF 9891 BK are temperature-resistant up to 160 °C.Key featuresLehvoss Luvocom 3F PAHT CF 9891 BK inside15% carbon fiber reinforced PA6 filament for improved stiffness50% reduced water uptake at a four times slower rate compared to other PA6 filamentsTemperature resistant up to 160 °C (200h)Tensile strength up to 120 MPa3D prints with high dimensional accuracy and increased layer adhesionGood electrical properties ApplicationsDynamically-stressed partsFunctional prototypesJigs, tools, and fixturesEnd-use parts General printing guidelines *Nozzle size: ≥ 0.4mmLayer height: ≥ 0.10mmExperience level: ExpertPrint temp: ± 260 – 270° CFan speed: 0 – 15%Drying: 4h @100°C or 12h @70°CHeat bed: ± 70 – 80° CEnclosure needed: NoAdhesion: EasyFix Nr.
VI*) Above displayed settings are meant as guidance to find your optimal print settings.
These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer.
There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.AbrasivenessPlease be aware that this 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature.
In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments.
We recommend to use nozzles from stainless steel or other hardened alloys.Filament lengthρ: 1.24 g/cc0.2 Kg spool0.5 Kg spoolØ 1.75mm± 67m± 168mØ 2.85mm± 25m± 63m Product export informationHS Code: 39169090Description: MonofilamentCountry of origin: the Netherlands Compliance *This filament is compliant to below-listed directives and regulations.RoHS directive 2011/65/ECREACH directive 1907/2006/EC*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
