Luvocom 3F PAHT KK 50056 BK FR filament is a PA6 Nylon filament filled with ceramic microspheres. It has the highest flame retardant rating and produces low smoke.
By that, this filament complies with the fire behavior norms for the railway industry.
Read more about flame-resistant railway materials in this blog.UL-94 V-0 flame retardant ratingEN 45545 (fire behavior of materials in trains)ISO 4589-2 OI (oxygen Index) R22 + R23 – HL1, HL2, HL3ISO 5659-2 Ds (smoke density) R22 + R23 – HL3Printed parts are stiff, strong, and temperature resistant up to 160C.
Your parts can operate in high temperature conditions and resist high temperature fluctuations. Luvocom 3F PAHT KK 50056 BK FR is an excellent material for electrical insulation.
- UL-94 V-0 flame retardant ratingComplies with
- EN 45545 fire behavior norms for trainsHeat resistant up to
- 160 °CElectrical insulator.Halogen free
- Suitable ApplicationsHigh performance end-use partsReplacement parts in vehiclesApplications that require fire resistancePrinting electrical insulating partsSmall scale productions
- Product Video General printing guidelines *Nozzle size: ≥
- 0.5mmLayer height: ≥
- 0.20mmExperience level: ExpertPrint temp: ±
- 270 – 300°CFan speed
- 0 – 25%Drying
- 12h @80°C (max)Heat bed: ±
- 90 – 110°
- CEnclosure needed: RequiredAdhesion
- EasyFix Nr. VI*)
- Above displayed settings are meant as guidance to find your optimal print settings
- These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer
- There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting
- Material PropertiesTypical ValueTest
- MethodSpecific gravity1.49 g/cm³ISO
- 1183-3Water absorption (23°C /
- 24h)109 ΩDIN IEC
- 60167Surface resistance (ROB)>109
- ΩDIN IEC 60093
- Drying recommendationsLuvocom 3F
- PAHT KK 50056
- BK FR is a hygroscopic filament and therefore it is necessary to pre-dry thefilament in a blast drying oven at below settings:Temperature
- 80°CDuration: 12hoursFor optimal print results we recommend to print the pre-dried
- Luvocom 3F PAHT
- KK 50056 BK
- FR filament from a drying box to avoid that the material can accumulate humidity from the environment
- AbrasivenessPlease be aware that this
- 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature
- In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments
- We recommend to use nozzles from stainless steel or other hardened alloys.Storage and handlingFilament should be stored at room temperature in a dry and dark place with humidity below
- 15%. Recommended storage temperature is ca
- 18-25°C (64.4 -77.0°F)
- Keep out of moisture, sunlight and direct heat
- When stored properly, product has a shelf life of
- 24 months. To obtain the best parameters of the printed object, it is recommended to dry the material prior to usage and to
- 3D print it directly from a dry box
- Compliance *This filament is compliant to below-listed directives and regulations.RoHS directive
- 2011/65/ECREACH directive 1907/2006/EC*)
- This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.Product export informationHS
- Code: 39169090Description: Monofilament for
- 3D printingCountry of origin
- European Union
