FormFutura - Brass Glossy PLA 1.75mm - 0.75kg

Parts printed with High Gloss PLA have an extremely high gloss. The surface finish results in high levels of light dispersion and reflection.

High Gloss PLA filament comes in various deep brilliant colors and allows you to 3D print parts with almost no visible layers.High Gloss PLA is a modified 3D printing filament that is based on PLA (polylactic acid).

It has been enhanced with several other polymers and modifiers.Unique featuresExtremely high glossHigh level of light dispersion and reflectionWide variety of deep brilliant colors3D prints with almost no visible layersVery smooth and silky surface finishCompatible with AquaSolve PVA for complex dual extrusion 3D printing ApplicationsAesthetics, design, and artComplex educational projects and modelsHousehold articlesVisualization aids General printing guidelines *Nozzle size: ≥ 0.15mmLayer height: ≥ 0.1mmExperience level: BeginnerPrint temp: ± 210 – 240° C *Fan speed: 80-100%Buildplate adhesion: EasyFix Nr.

IHeat bed: 40 – 60° CEnclosure needed: No *) Above displayed settings are meant as guidance to find your optimal print settings.

These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer.

There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.*) If you use a vanadium steel / hardened steel and/or tungsten carbide nozzle then please raise the printing temperature up to 240 – 245° C to maintain the high gloss.

If you still have trouble losing the shine, you can drop the part cooling fan to 50% or lower. For brass and copper nozzles you can print at215 – 225° C.

Please do feel free to experiment with these settings.Filament lengthρ: 1.24 g/cc50 gr coil0.75 Kg spool2.3 Kg spool4.5 Kg spool8 Kg spoolØ 1.75mm± 16.8m± 251m± 771m± 1509m± 2682mØ 2.85mm± 6.3m± 95m± 291m± 569m± 1011m Product export informationHS Code: 39169090Description: MonofilamentCountry of origin: the Netherlands Compliance *This filament is compliant with the below-listed directives and regulations.RoHS directive 2011/65/ECREACH directive 1907/2006/EC*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.