FormFutura - Willow Wood Fill PLA 1.75mm - 0.25kg

EasyWood looks, feels and smells like real wood. A beautiful wood-nerve structures can be obtained by grinding the printed object with a piece of fine grit sandpaper.

Alternatively the same result can be obtained by varying the print temperature during the printing process.EasyWood is a PLA-based filament which is filled with 40% grinded wood particles.

The wood particles in the filament have the added benefit of warp-free printing.Unique featuresExtremely high wood-filling of 40%Real wood feel, look and smellVery easy to printWarp-free printing and no deformation after coolingGreat thermal stability and filament flowing behaviourPerfect first- and inter-layer adhesionCan be printed at high printing speedsBy postprocessing the printed object with a piece of fine grit sandpaperBy varying with the print/extrusion temperatureBiodegradable General printing guidelines *Nozzle size: ≥ 0.4mmLayer height: ≥ 0.2mmFlow rate: ± 100%Print temp: ± 190 – 240° CPrint speed: 20-45mm/sRetraction: Yes ± 5mmHeat bed: ± 50 – 60° CFan speed: 80-100%Experience level: Beginner*) Above displayed settings are meant as guidance to find your optimal print settings.

These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer.

There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.Filament lengthρ: 1.20 g/cc50 gr coil0.5 Kg spool2.3 Kg spoolØ 1.75mm± 17.3m± 173m797mØ 2.85mm± 6.5m± 65m300m Nozzle cleaningWhen printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle.

This will make sure that any potential fillers are flown out of your nozzle.

It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.Product export informationHS Code: 39169090Description: MonofilamentCountry of origin: the Netherlands Compliance *This filament is compliant to below listed directives and regulations.RoHS directive 2011/65/ECREACH directive 1907/2006/EC*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.