FormFutura - AquaSolve Natural Water Soluble PVA 1.75mm - 0.75kg

AquaSolve PVA (polyvinyl alcohol) is a water-soluble support material for complex multi-extrusion 3D printing. It exhibits an excellent thermal stability and can be printed at relatively low temperatures.

This makes AquaSolve PVA an ideal support material for PLA-based materials with good thermal and chemical adherence.

• Excellent (cold) water solubilityGood thermal stability, resulting in less risk on deterioration/crystalizing inside the nozzleMax thermal stability of
• 210° C, tested up to
• 256 seconds with no flowBiodegradable once dissolved in waterSafe dissolution in tap waterCan be disposed of in the kitchen sink, or household drain as the material is “ok biodegradable water” certifiedGood bonding to
• PLA-based materials and other (thermo)plastics that print within a similar temperature range
• ApplicationsReliable multi-extrusion 3D printing of complex structures that require a water-soluble support material3D printing geometries with large overhangs, or complex hollow structuresPVA
• Molds General printing guidelines *Nozzle size: ≥
• 0.15mmLayer height: ≥
• 0.1mmExperience level: ExpertPrint temp: ±
• 190 – 210°
• C *Fan speed
• 0 – 30%Heat bed: ±
• 0 – 60°
• CEnclosure needed: No*)
• Above displayed settings are meant as guidance to find your optimal print settings
• These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer
• There are a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.*)
• Do not exceed a printing temperature of
• 225˚C, because AquaSolve
• PVA will then crystallize to quickly and it will no longer flow and/or dissolve in water
• Printing with PVA materials does require a certain level of
• 3D printing expertise as
• PVA cannot stay too long in the hot secondary/support nozzle and needs to flow and by that needs expert tweaking to find the optimal “waiting temperature” for the material not to deteriorate/crystalizing in the hot secondary/support nozzle when not being
• 3D printed. Filament lengthρ
• 1.23 g/cc50 gr coil0.3
• Kg spoolØ 1.75mm±
• 16.9m± 101mØ 2.85mm±
• 6.4m± 38mPVA compatibility overview *AquaSolve
• PVAAtlas SupportHelios SupportABSpro––+ABSpro
• Flame Retardant––+ApolloX––++CarbonFil–++–Centaur PPNo dataNo dataNo dataClearScent
• ABS––++Crystal Flex––+Easywood++/-–Refill PLA++/-–EasyFil ePLA++/