FormFutura - White Flame Retardant ABS+ 1.75mm - 4.5kg

High Speed Compatible 150mm/s With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment.

These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.ABSpro Flame Retardant is a professional, halogen free, self-extinguishing filament.

It has been engineered to meet the UL 94 V-0 flammability standards.

The standard prescribes the vertical burning of filament (or a 3D printed object) to stop within 10 seconds.The mixture used for our ABSpro Flame Retardant filament contains a high percentage of PC, ABS and halogen-free flame retardant modifiers.

Due to the flame retardant modifiers the filament can be printed at relatively low temperatures.Unique featuresSelf-extinguishing flammability propertiesEngineered to meet UL 94 V-0 standardsExcellent dimensional stabilitySuperb interlayer adhesionHalogen free General printing guidelinesNozzle size: ≥ 0.15mmLayer height: ≥ 0.1mmFlow rate: ± 100%Print temp: ± 240 – 265° C *Print speed: MediumRetraction: Yes ± 5mmHeat bed: ± 100 – 110° C *Fan speed: 0-50%Experience level: Expert*) Above displayed settings are meant as guidance to find your optimal print settings.

These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer.

There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.*) Because of the relative high percentage of added PolyCarbonate, ABSpro – Flame Retardant has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro – Flame Retardant.*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.Product Video Filament lengthρ: 1.18 g/cc50 gr coil0.5 Kg spoolØ 1.75mm± 17.6m± 176mØ 2.85mm± 6.6m± 66m Product export informationHS Code: 39169090Description: MonofilamentCountry of origin: the Netherlands Compliance *This filament is compliant to below listed directives and regulations.RoHS directive 2011/65/ECREACH directive 1907/2006/EC*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.