FormFutura - Refill Dark Blue PLA 1.75mm - 0.75kg

High Speed Compatible 150mm/s With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment.

These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology. EasyFil PLA is a high-end impact modified PLA (Poly-Lactic Acid) filament.

It is optimized for FFF / FDM 3D printing technology. This has resulted in an easy to use 3D-printer filament. EasyFil PLA is tougher and less rigid than standard PLA.

Its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.

Unique featuresVery easy to printWarp-free printing and no deformation after coolingImproved flowing behaviour and inter-layer adhesionGood first layer adhesion to several (un)heated print surfacesSlightly softer than standard PLA resulting in improved strength and impact resistanceAlmost odourless processing/printingBiodegradableWide variety of vivid opaque colors General printing guidelines *Nozzle size: ≥ 0.15mmLayer height: ≥ 0.1mmFlow rate: ± 100%Print temp: ± 190 – 230° CPrint speed: MediumRetraction: Yes ± 5mmHeat bed: ± 50 – 70° CFan speed: 80-100%Experience level: Beginner*) Above displayed settings are meant as guidance to find your optimal print settings.

These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer.

There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.

Filament lengthρ: 1.24 g/cc50 gr coil0.75 Kg spool2.3 Kg spool4.5 Kg spool8 Kg spoolØ 1.75mm± 16.8m± 251m± 771m± 1509m± 2682mØ 2.85mm± 6.3m± 95m± 291m± 569m± 1011m Product export informationHS Code: 39169090Description: MonofilamentCountry of origin: the Netherlands Compliance *This filament is compliant to below listed directives and regulations.RoHS directive 2011/65/ECREACH directive 1907/2006/ECThis declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.