FormFutura - Refill Iron Grey PETG 1.75mm - 0.75kg

ReFill PETGReFill offers a completely new way to experience 3D printing filament. We’ve ditched the wasteful plastic spools altogether. ReFill consists only of the filament coil itself, housed in a reusable, vacuum-sealed bag.

This significantly reduces waste compared to traditional spools.FormFutura’s ReFill system is designed with the aim of lessening your carbon footprint.

It brings an 80% reduction in packaging waste, while potentially decreasing shipping volume by up to 55%.The user-friendly system is compatible with nearly all FDM printers, including the widely used AMS system.

High Speed Compatible 150mm/sWith high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment.

These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.

Do keep in mind that faster print speeds also require higher print temperatures.ReFill PETG is a filament coil that fits on a reusable master spool.

Available for the 750g version and reusable flanges for the 2000g version.You can download the files to print your very own 750 grams or the 2000 grams variant here.This solution is an effort to reduce packaging waste.

This results in more efficient shipping and less pressure on the environment.Important key featuresMinimal packaging waste (no spool / box).Retail price of €16,99 for 0.75kg coils.Food contact approved according to EU directives.Available in 0.75kg coils.Very easy to 3D print.Suitable applicationsFunctional prototyping.Waterproof applications.Snap fit components.Mounts, jigs, and fixtures.Signage.Reduce your carbon footprint with ReFill PETGFormFutura ReFill PETG isn’t spooled on a disposable spool.

It comes on a coil and fits on reusable master spools.ReFill coils are only packaged in reusable vacuum-sealed zipper bags. These zipper bags can be (re)used for storing your various filaments!

General printing guidelines *Nozzle size: ≥ 0.1mmLayer height: ≥ 0.05mmEnclosure needed: NoPrint temp: ± 220 – 250° CFan speed: 0-60%Experience level: BeginnerHeat bed: ± 75 – 80° CAdhesive: EasyFil Nr.

I*) Above displayed settings are meant as guidance to find your optimal print settings.These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer.There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.Filament lengthρ: 1.29 g/cc0.75 Kg coil2.3 Kg coilØ 1.75mm± 242m± 741mØ 2.85mm± 91m± 279m Product export informationHS Code: 39169090Description: Monofilament for 3D PrintingOrigin: European Union Compliance *This filament is compliant to below listed directives and regulations.RoHS directive 2011/65/ECREACH directive 1907/2006/EC*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.