PPSU (Polyphenylsulfone) is an amorphous ultra-performance filament based on sulfone polymer from Solvay. PPSU has a glass transition temperature of 220°C. Parts printed with PPSU filament can operate in temperatures up to 180°C.
It is resistant against most common automotive fluids.
It also is designed to meet the UL 94 V-0 standards with low smoke evolution and low smoke toxicity, making the filament extremely suitable for automotive applications.The material is qualified for unlimited steam sterilization through EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilization.
These are ideal characteristics for usage in the medical industry. The material also meets the ISO10993 standards for medical applications.PPSU offers a better impact resistance and chemical resistance compared to regular PEI filaments.
- Solvay PPSU insideExcellent thermal properties with a glass transition temperature of
- 220°C.Flame retardant (UL
- 94 V-0) with low smoke evolution and low smoke toxicitySuperior hydrolytic resistanceQualified for repeated steam sterilization (>1000 cycles)High
- Environmental Stress Crack
- Resistance (ESCR)Very high impact strength and high stiffness over a wide temperature rangeVery good resistance against high energy radiation (gamma- and
- X-rays)Good electrical insulating and dielectric properties
- ApplicationsIndustrial applicationsElectronicsMedical partsAerospace applicationsAutomotive
- General printing guidelines *Nozzle size: ≥
- 0.4mmLayer height: ≥
- 0.10mmExperience level: ExpertPrint temp: ±
- 360 – 400°
- CFan speed: 0
- 25%Drying: +4 hours at max.110°CHeat bed: ≥
- 120° CEnclosure needed
- 90°C heated chamberAdhesion
- EasyFix Nr. VII*)
- Above displayed settings are meant as guidance to find your optimal print settings
- These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer
- There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.Filament lengthρ
- 1.29 g/cc0.2 Kg spool0.5
- Kg spoolØ 1.75mm±
- 64m± 161mØ 2.85mm±
- 24m± 61m Product export informationHS
- Code: 39169090Description: MonofilamentCountry of origin: the
- Netherlands Compliance *This filament is compliant to below-listed directives and regulations.RoHS directive
- 2011/65/ECREACH directive 1907/2006/EC*)
- This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products
