Skip to main content
filament.baby

Browse more like this

More from Sunlu All ABS More black filaments Browse all specialties
Sunlu - Refill Black ABS 1.75mm - 1kg
Sunlu ABS Refill

Sunlu - Refill Black ABS 1.75mm - 1kg

Black
$15.99 — $15.99/kg
/ 1kg
Report incorrect data

Available variants

Viewing 1kg • 1.75mm • Refill
1kg • 1.75mm View this variant 5kg • 1.75mm View this variant

Where to buy

Shop Manufacturer

Direct from manufacturer.

$15.99
Buy from Shop

Specifications

Diameter
1.75mm
Weight
1kg
Color
Black
Color family
Black
RAL code
RAL 7016
LAB
L* = 9, a* = 0, b* = 0
Material
ABS
Series
Refill
Print temp
250°C
Bed temp
105°C

Description

What is SUNLU Easy ABS?

We adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix.While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance.The result is a minimum printing temperature of 225℃ and a minimum heating of 70℃ for the base plate.But E-ABS still maintains the low stress it should have: no cracking, no warping!

Description:1. Printing does not need a holding tank, open printer can be used!2.

Low shrinkage, print models do not warp or crack!(Note: Printing the bottom 10 square centimeters above the model can raise the temperature of the base plate to 80 ~ 90 degrees.)3. Very low odor when printing4.

Filament do not need to dry, very little impact by humidity5. balanced physical properties, high strength, good toughnessParameter:Material: SUNLU E-ABS(Easy-ABS)Wire diameter: 1.75/3.0MMTolerance: 0.02MMPrinting temperature: 225-235℃Base plate temperature: 60-70℃...

Other colors in this series

Klein Blue
Sky Blue
Transparent Blue
Grey
Grey
Red
Transparent Red
Grass Green
Mint Green
Oliver Green

Same color, different brands

Compare similar shades across manufacturers before buying.

Same material, different brands

Compare ABS options across manufacturers.

Same brand, different colors in Refill

Explore adjacent shades from Sunlu.