Skip to main content
filament.baby

Browse more like this

More from Sunlu All ABS More green filaments Browse all specialties
Sunlu - Refill Mint Green ABS 1.75mm - 1kg
Sunlu ABS Refill

Sunlu - Refill Mint Green ABS 1.75mm - 1kg

Mint Green
$15.99 — $15.99/kg
/ 1kg
Report incorrect data

Where to buy

Shop Manufacturer

Direct from manufacturer.

$15.99
Buy from Shop

Specifications

Diameter
1.75mm
Weight
1kg
Color
Mint Green
Color family
Green
LAB
L* = 63, a* = -48, b* = 26
Material
ABS
Series
Refill
Print temp
Check packaging
Bed temp
Check packaging

Description

What is SUNLU Easy ABS?

We adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix.While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance.The result is a minimum printing temperature of 225℃ and a minimum heating of 70℃ for the base plate.But E-ABS still maintains the low stress it should have: no cracking, no warping!

Description:1. Printing does not need a holding tank, open printer can be used!2.

Low shrinkage, print models do not warp or crack!(Note: Printing the bottom 10 square centimeters above the model can raise the temperature of the base plate to 80 ~ 90 degrees.)3. Very low odor when printing4.

Filament do not need to dry, very little impact by humidity5. balanced physical properties, high strength, good toughnessParameter:Material: SUNLU E-ABS(Easy-ABS)Wire diameter: 1.75/3.0MMTolerance: 0.02MMPrinting temperature: 225-235℃Base plate temperature: 60-70℃...

Other colors in this series

Grass Green
Oliver Green
Transparent Green
Grey
Grey
Silver
Lemon Yellow
Natural(White)
White
Gold

Same color, different brands

Compare similar shades across manufacturers before buying.

Same material, different brands

Compare ABS options across manufacturers.

Same brand, different colors in Refill

Explore adjacent shades from Sunlu.