Sunlu - Refill Natural(White) ABS - 1kg
Buy Now
Shop Manufacturer Open offerSpecifications
- Diameter
- 1.75mm
- Weight
- 1kg
- Color Family
- white
- Material
- ABS
- Series
- Refill
Description
What is SUNLU Easy ABS?
We adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix.While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance.The result is a minimum printing temperature of 225℃ and a minimum heating of 70℃ for the base plate.But E-ABS still maintains the low stress it should have: no cracking, no warping!
Description:1. Printing does not need a holding tank, open printer can be used!2.
Low shrinkage, print models do not warp or crack!(Note: Printing the bottom 10 square centimeters above the model can raise the temperature of the base plate to 80 ~ 90 degrees.)3. Very low odor when printing4.
Filament do not need to dry, very little impact by humidity5. balanced physical properties, high strength, good toughnessParameter:Material: SUNLU E-ABS(Easy-ABS)Wire diameter: 1.75/3.0MMTolerance: 0.02MMPrinting temperature: 225-235℃Base plate temperature: 60-70℃...
