Luvocom 3F PEEK 9581 (Polyether Ether Ketone) is a high-performance 3D printer filament. The material is used in various industries, ranging from aerospace, marine, and automotive to medical, oil & gas and energy.
It is often used to replace metal and composite parts.Parts printed with the material are suitable for use in applications that will be exposed to short term service temperatures of up to 260°C and continuous service temperatures up to 250°C.
The 3D printed parts have excellent layer bonding, resulting in an unsurpassed dimensional accuracy and z-strength.
- Lehvoss Luvocom 3F
- PEEK 9581 insideSuitable for applications with a continuous service temperature of
- 250°C.Short term service temperature of
- 260°C (during lifetime max
- 200h)Heat deflection temperature of
- 145°CHigh Z-strengthExcellent mechanical propertiesFlame resistance properties according to
- UL 94 V-0Exceptional chemical resistance properties
- ApplicationsDynamically-stressed partsHighly chemically-resistant partsAerospace applicationsAutomotive
- The PAEK familyPolyArylEtherKetone (PAEK) is a family of semi-crystalline high performance thermoplastics that are characterized by high mechanical strength and excellent resistance to temperature, chemicals and wear.The most widely used members of the
- PAEK thermoplastic family are:PolyEtherEtherKetone (PEEK)PolyEtherKetoneKetone (PEKK)PolyEtherKetone (PEK)PolyEtherKetoneEtherKetoneKetone (PEKEKK)PolyEtherEtherKetoneKetone (PEEKK)
- General printing guidelines *Nozzle size: ≥
- 0.4mmLayer height: ≥
- 0.10mmExperience level: ExpertPrint temp: ±
- 370 – 420°
- CFan speed: 0
- 25%Drying: +4 hours at max.110°CHeat bed: ≥
- 120° CEnclosure needed
- 90°C heated chamberAdhesion
- EasyFix Nr. VII*)
- Above displayed settings are meant as guidance to find your optimal print settings
- These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer
- There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting
- Filament lengthρ: 1.31 g/cc0.2
- Kg spool0.5 Kg spoolØ
- 1.75mm± 63m± 159mØ
- 2.85mm± 24m± 60m
- Product export informationHS
- Code: 39169090Description: MonofilamentCountry of origin: the
- Netherlands Compliance *This filament is compliant to below-listed directives and regulations.RoHS directive
- 2011/65/ECREACH directive 1907/2006/EC*)
- This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products
